Server FSP 82060 Topping Warmer with Pump, 3 Qt Stainless Steel

Speed up sundae and dessert service with the Server FSP 82060 Topping Warmer with Pump, a 500-watt stainless steel water-bath warmer that serves hot fudge, caramel, and white chocolate from a #10 can or 3 qt jar in measured portions up to 1 oz. A wrap-around heating element and adjustable thermostat (75°F to 210°F) heat the container evenly on all sides, so sauce stays pourable from the first sundae to the bottom of the can. Designed for ice cream shops, concession stands, cafés, and dessert stations, this NSF-listed, countertop topping warmer offers consistent portion control in under 8" of counter space.

Key Features

• Portion-Control Pump – Serves 1 oz per stroke. The included collars cut that down in 1/8 oz steps, which helps you hold food cost on expensive toppings.
• Water-Bath Heating with Spacer – The included 82063 spacer lifts the can off the bottom so water surrounds the container and doesn't spill into the food. That means no scorched sauce and less product left behind in the can.
• Adjustable Thermostat – The dial is marked in 5°F steps from 75°F to 210°F, and an ON/OFF rocker switch controls power. The knob locks in place so it can't be bumped during service.
• Compact 7 3/4" Footprint – Fits a crowded front counter, sundae bar, or concession window. A 72" cord reaches a standard 120V outlet.
• Serve From Can, Jar, or Pouch – Runs straight from a #10 can or a 3 qt 94009 stainless jar. The 81184 Can2Pouch kit lets it pump from 48 oz pouches, so you can switch packaging without buying a new warmer.

Specifications

• Sold each: warmer base, 81320 stainless pump, and 82063 spacer (#10 can and 94009 jar sold separately)
• Capacity: #10 can or 3 qt (96 oz / 2.8 L) jar
• Dimensions: 15 3/4" H x 7 3/4" W x 13 1/16" D | Weight: 9 lb
• Material: stainless steel base, water vessel, and pump; black thermostat knob
• Electrical: 120V, 500W, 4.2A, NEMA 5-15P plug, 72" cord
• Thermostat range: 75°F to 210°F (24°C to 99°C) | Water fill: 2.5 cups (20 oz)
• Portions: 1 oz max, adjustable in 1/8 oz steps
• Certifications: NSF listed (Standard 4, rethermalization and hot food holding), cULus, CE
• Warranty: 2 years | Model: FSP | Part: 82060 | UPC: 687329011216
• Accessories: 94009 3 qt jar, 94008 jar storage lid, 81184 Can2Pouch kit, 86819 squeeze bottle inset kit, 81140 spout warmer

FAQ

How many servings does a 3 qt topping warmer hold? A full 3 qt jar holds 96 oz, which is about 96 one-ounce or 192 half-ounce portions of hot fudge or caramel. Most shops keep a second filled jar warming in the walk-in rotation so they can swap jars at the peak of a rush.

Can the Server FSP rethermalize refrigerated toppings? Yes. It's NSF listed under Standard 4 to bring product from 40°F to 165°F within 2 hours, then hold it at or above 150°F. Preheat the water bath for 5 minutes on the highest setting before adding the container.

Can I use this warmer for nacho cheese or other foods that need temperature control for safety? Not as shipped. Server says that use requires the FSPW-SS 81140 heated spout, because sauce left in an unheated spout can drop below safe holding temperature. As shipped, the FSP is meant for dessert toppings like hot fudge, caramel, and butterscotch.

Fill the basin daily with fresh water, preferably filtered, empty it at close, and dry it fully. The stainless water vessel will last for seasons of daily use. This topping warmer is a smart choice for dessert operations looking for portion control, even heat, and a small footprint at the serving station.

Shop Server Products dispensers and commercial food warmers.